Original 1973 MSRP $USD > $830.00
Inflation Adjusted 2015 MSRP $USD > $4,400.00
***
Akai’s 1973 product catalogue is one of my favourites. It’s exuberant, colourful and full of beautifully designed and crafted audio gear. This is, of course, one of those pieces…
The AS-980 is Akai’s top-of-the-line Quad-Monster Receiver for 1973 through 1975. I decided to introduce the term Quad-Monster to differentiate these beasts from the top-end Receivers of the Receiver Wars while still awarding them the title of Monster. Why? Most of the high-end Quadraphonic Receivers are typically physically impressive Beasts that possess huge dimensions needed to house the four separate amplifiers required. And the AS-980 is no exception, being the widest Receiver I have seen to date enter my collection it measures 66cm or 26″ wide – this is a full 10cm wider than my Pioneer SX-1980 Stereo Monster Receiver in my collection! I placed a coke can into some of the above shots to better enable the viewer to appreciate the dimensions of this Beastie!
I love the early 1970’s adverts for HiFi gear. They are playful, sometimes naughty, and free from Orwellian Newspeak otherwise known as Political Correctness.
The early 1970s saw the major manufacturers embrace 4-channel Quadraphonic sound seeing it as the next big thing. Decades before Dolby Digital Surround was introduced Quadraphonic sound saw a battlefield full of formats and the consumers of the time must have been a little bewildered and confused about just which quadraphonic format to choose. Akai’s solution to this quandary – pun intended 🙂 – was to pack their high-end Receiver with every Quadraphonic Decoder available!
As such the sheer size of the unit was also necessary to house all the controls and displays necessary for both stereo sound reproduction and the quadraphonic settings.
You might think that you would need a Pilot’s license to operate this Beast, so I thought it might be fun to take a journey across the fascia. Moving from left to right the controls for mains power, speaker selection and the 2-channel or 4-channel mode selector. This Receiver accommodates up to 3 pairs of speakers allowing you to select a 2 pair combination for playback at any time. And in Quadraphonic this actually translates into 6 pairs of speakers in total with up to 4 pairs of speakers operating at any one time. So this amplifier while operating in a Quadraphonic mode could have 8 speakers pumping at once!
Akai’s Flagship Quadraphonic Receiver the AS-980 paired with their top-end Quad Reel-to-Reel
The 2/4 channel mode selector switch is such a great feature because many other manufacturers placed these on the BACK of their Receivers and Amplifiers, and some even involved changing or rotating a plug that needed the use of a screwdriver! On this side of the display are the dual tuner controls representing tuning and signal strength. The next section incorporates independent Bass, Treble and Left and Right Balance controls for the Front and Rear channels. It also features independent Loudness controls for each of these channels, this is the only model I have come across to have this feature! Next to this is a linear potentiator for controlling Front and Rear Balance.
The centre of the fascia is dominated by two large and important looking knobs that are for Main Volume, Balance and Tuning. One unique feature is a Volume Limiter device placed around the volume knob. I’ve never come across this anywhere else to date! It surrounds the volume knob and allows you to rotate it to set a desired maximum limit, the device will stop the volume knob from rotating beyond it without a fair bit of effort. A great idea to protect the unit from kid and teenager abuse 🙂
Around these are placed some push button controls for Muting and High and Low Filters and a DIN plug for an external remote control, the Akai RC-4. I have been looking around for this remote, will let you know if I come across it. Directly above this the display features and attractive blue-lit tuner dial and illuminated pointer.
The next section offers two dials. One gives the user a generous selection of inputs or music sources to choose from, including my favourite being two turntable inputs, as well as a MIC and an AUX option. Below this is a 4-channel mode selector offering options for Mono, Stereo, Discreet, SQ and Matrix. Right next to this is the CD-4 decoder controls. Again Akai was on the ball and thoughtfully placed the CD-4 separation controls on the Front Panel (many other manufacturers would place these on the rear of their units).
Situated directly above the CD-4 controls is an FM Muting push button and Meter Level Controls to ensure no matter what volume you are listening to your music the VU meters are satisfyingly dancing away. The 4 VU Meters are on display directly above this. If your listening in 2 Channel – only 2 VU meters are lit up and on display, while in 4 channel modes all 4 light up 🙂 Next to these is also the attractive 4 channel mode light to let you know that the amplifier is operating in 4-Channel mode.
Finally we complete our journey and have finally reached the far right of the fascia where we discover the selectors for 3 Tape Monitors giving you even more input sources with output as well. Perfect for connecting into your PC or Mac. And a front panel MIC and DUBBING inputs. And lastly but a very important feature that should not be overlooked is that this unit came with a multi-voltage selector, meaning you can take this unit with you wherever you wish to travel and with a small adjustment you can operate it on any power-grid around the world!
All up that’s a heck of a lot of features! BTW the Exam will be held at 08:00 hours sharp tomorrow. So now that you have your Pilot’s license let’s take a look at whats under the hood…
This beauty is jam packed full of amplifiers, decoder and equaliser boards, every square inch of space has been fully utilised here. Everything is built upon its own separate board.
The amplifiers consists of a direct-connected pre-amplifier and a double-push-pull Darlington configured SEPP-ITL-OTL Power Amplifier. In stereo mode this setup produces 50 Watts RMS per channel at 8 ohms while in Quadraphonic Mode it generates 32 Watts RMS per channel at 8 ohms.
This unit is powered by a dual +/- power supply consisting of a large laminate-core transformer. In this configuration only a single large smoothing capacitor is directly integrated to the power supply circuit while other smoothing capacitors are built into the power amplifier boards directly.
An advert for a complete Akai Quadraphonic System with a debonair Bond like character with a martini. If only I’d known sooner that the secret to success with women was a 4 Channel Akai HiFi! Or perhaps this advert is trying to say that listening to an Akai 4-Channel system feels like the warm embrace of 4 lovely ladies?
It is finished with a genuine wood veneer case and dark brushed aluminium fascia and all up weighs an hefty 20.5kg!
What doesn’t translate with the technical specs is it’s sound. Warm, silky and detailed sound with heaps of low end is what you can expect from this Receiver. You will want a large room to play this Monster in so you can enjoy it in it’s full glory.
It’s decoders are excellent and you can achieve brilliant channel separation in it’s various Quadraphonic modes. Many quad amps suffer from lack of power, but not this bad boy, it is the second most powerful Quadraphonic amplifier in my collection, and I am almost certain this was the most powerful quadraphonic Receiver in 1973.
Mine admittedly get’s most use in Stereo playback, but with just a flick of a switch it’s ready to play quadraphonic! This unit would also be fun to setup for 4-track recording either to digital or reel-to-reel.
It is seriously is one of my favourite Receivers (for both Quad & Stereo) for it’s unique styling and sheer size and I just love its character, warmth and power and I currently prefer it over any Sansui I have auditioned to date! I am currently restoring Pioneer’s King Quad the QX-949A, when I am finished I am looking forward to running these two head-to-head!
Specifications:
Power Output:
2-Channel Mode: 50 Watts (x2) Continuous Power Output @ 8 ohms.
4-Channel Mode: 30 Watts (x4) Continuous Power Output @ 8 ohms.
Frequency Response: 10Hz – 60kHz at 8 ohms (-3dB)
Harmonic Distortion: 0.5% at Rated Power Output, 0.05% at 20 Watts
Input sensitivity: 3mV (mic), 3mV (MM), 170mV (DIN), 170mV (line)
Signal to noise ratio: 35dB (mic), 35dB (MM), 40dB (DIN), 35dB (line)
Output: 170mV (line), 34mV (DIN)
Dimensions: 650 x 168 x 426mm / 25.6 x 6.6 x 16.8″ / (W) x (H) x (D)
Weight: 20.5kg / 45.1 lbs
Posted In: Featured, Quadraphonic, Receivers
Luis condores
·
Hola amigo, te saludo desde chile!!!, si de tán lejos y soy un entusiasta novato!!!, y me hice de este akai as-980 y como lo disfruto !!!, le conecto mí pc con musica flac, luego un mini dac y al auxiliar y sas escucho a los angeles, es un deleite oir a queen o pink floid etc… tambien lo conecto a una tornameza marantz 6300 y una reel b70 , también curiosamente tengo la pioneer qx- 949 , un technics sa 8100x y un sansui 919, pero me quedo con akai, un abrazo a la distancia.
admin Author
·
Bienvenido amigo y me alegra saber de ti todo el camino en Chile! He utilizado traductor Google, así que espero que esto tiene sentido! Esta Akai es ciertamente especial y sin duda su reproducción de la música derecho sobre él 🙂 Su otro engranaje suena excelente, así 🙂 yo era sólo el otro día admirando un Marantz 6300 Turntable y contemplando conseguir uno.
Tenga cuidado, el audio de la vendimia puede ser adictivo;)
Jefferson Douglas
·
Hi so this Akai doesn’t do SQ right? And did you compare it to the Sansui QRX-9001 as well? Great site BTW 🙂
admin Author
·
Thanks! 🙂 Yes this AKAI is loaded with all of the Quad formats including SQ. I am a big fan of Sansui – particularly their early 70s gear. I personally haven’t listened to the Sansui QRX-9001 which is a late 70s piece with much more horsepower while this Akai is from the early 70s, more akin to Sansui’s QR-6500 – which is a beautiful receiver with huge proportions.
Frank
·
Nice site !
Greatings from Holland
Terry A Drake, USN(RET)
·
I owned one of these shortly after they came out. I enjoyed it for many years until the preamps finally died. All attempts to get it repaired were met with disdain. I finally gave it to a navy electronics office to do what they could or toss it. During the time I had it, it provided very good listening pleasure from all sources. I also had several four channel pieces of equipment that complemented the amplifier, including 4-channel eight track, 4-channel turn table and 4-channel cassette player. All since lost in Hurricane Katrina. I would love to have the amp again, but at $4400, there is no way I could afford it, I only paid $400 originally.
admin Author
·
Hi Terry, this beauty is not for sale, this site is simply a homage to the audio products of yesteryear 🙂
The price reflects the devaluation of the US dollar since the time that Receiver was released – so the $4,400.00 USD is just the original MSRP adjusted for inflation as per http://www.usinflationcalculator.com/
For instance the $400.00 you spent back in the mid-seventies would have the purchasing power of roughly $2,150.00 USD today!
So you were the big spender back then even if it was 50% off MSRP 😉
Cheron McDaniel
·
I inherited a Akai AS-980, new in box with manual. Any idea of it’s value, or what someone would be willing to pay?
admin Author
·
*AHEM* *Cough* IMPORTANT! All information is provided purely for entertainment purposes only and should not be construed as legal or professional valuation advice or even as sensical in any way! Please consider seeking professional advice before acting.
Ok now the disclaimer is done with…
If you mean this is sealed, unopened, brand new in its original box then the value would be much greater.
I am assuming here that you mean the item was opened, used but is in mint condition in its original box. I also assumed that it is in good working order.
That’s always a tough question. While there is growing demand coming from yuppies and hipsters for high end vintage audio it’s still somewhat of a niche market, so how much you could get for it is also determined by how willing you are to wait for the right buyer to turn up. A quick sale will usually mean you didn’t ask for enough money!
The fact your have the original packaging and the item is in new condition does go a long way to improving its value, it IS an extremely rare find!!! There are currently NO Akai AS-980’s for sale on eBay (let alone one that’s mint in it’s box) so consider yourself as having a Monopoly!
If it was mine I would take some nice pictures, write a good but brief blurb and put it on eBay for around >$2000 and stick to my guns, be prepared to wait, and ignore the odd comment from the peanut gallery telling you that it’s over priced! What are they going to do? Go down the street to get it cheaper at Walmart???? But if you want a quick sale you can always ask for less.
Here is one I found they are asking 1200 Euros (~$1,359.06USD) no box and the condition is average I think – most of the case is not shown.
https://www.willhaben.at/iad/kaufen-und-verkaufen/d/sammlerstueck-akai-as-980-167560409/
FYI Currently the most expensive vintage Receiver on eBay is asking for $7500.00USD for a Technics SA-1000A and at my last look it had 60 watchers!
http://www.ebay.com/itm/Technics-SA-1000A-Receiver-SUPER-RARE-EXCELLENT-/282121663320?hash=item41afc2f358:g:ZN0AAOSwgY9Xdbqe
Mike
·
I’ve got one of these gems boxed up in storage. Owned it for about 25 years, and never stopped loving it! And after visiting your web site and learning things I never knew about it, I feel like I appreciate it even more. Excellent article!
I also had 2 GX-280D SS decks(and one remote) like the one pictured on top of it, so that was a cool thing to see here, too 🙂
dave
·
I need to replace the speaker slide control because it was messed up when i put it in for a cleaning, where could i find this part. I have been looking for years with no luck. Thanks Dave
Tomas Centurion
·
Hi there, thanks for this homage to the greatest AS-980 Quadraphonic from Akai. I live in Asuncion, Paraguay, got my unit used in the mid 80’s. I only have a pair of the original Akai speakers. I kept hidden inside a deposit full of vintage pro equipment and musical instruments. A month ago I decide to test + clean, everything works, sounds amazing with a turntable..real analog nostalgic sound….just love it, so proud to still keep it fully functioning.
Cheers!!!
Herbie
·
Great introduction for a great Akai high end…
I am proud owner from Holland
Simon
·
I have one of the AKAI Quadraphonic receivers and the speakers, including the hexagonal ones pictured in the top photo.
Anyone want it?
Buddy
·
Hi Simon,
I’m looking to build my first vintage hifi room so would be keen for some pics/specs on anything you may wish to sell.
Cheers, Bud
Mauricio
·
I love this site! Please, keep going.
Erd
·
I have that monster . What kind of speakers should i connect it for best result ?
Ross Dyck
·
I am looking for 4-6 speaker plugs for this unit and cannot seem to find them. any buddy know where I can a get a few?
admin Author
·
Hi Ross,
These are the ones I beleive…
https://www.ebay.com/itm/2x-Speaker-Jack-Plugs-for-Vintage-AKM-003-Pioneer-AKAI-ALLIED-Amplifier-Receiver/260968988869
Cheers